DBX 1066 Dual compressor limiter gate, selectable

Tuotenumero
309858
1066 Dual compressor limiter gate, selectable auto or manual/variable attack and release compression
498,00 €
Sis. alv 24%
Helsingin myymälä: Saatavilla tilauksesta nopeasti (2-14 vrk)
Tälle tuotteelle: Ilmainen toimitus!

Huom! Kun tilaat vähintään 295 eurolla, saat toimituksen ilmaiseksi!

1066 Dual compressor limiter gate, selectable auto (classic dbx®) or manual (variable attack and release) compression

After producing the world's most renown series of compressors, the task of producing a new compressor worthy of our reputation would be daunting for most engineers. Not for dbx®.
Our engineers know audio like no one else in the world. Now the fruits of their talents are available to you in the form of the 1066 Stereo Compressor/Limiter/Gate.

Want to instantly add that classic dbx response to your mix? It's there at the touch of the "Auto" button.
Or use the independent Attack and Release controls to tailor the 1066 to your specific needs.
Unwanted frequencies or mic bleed in the signal path? Frequency dependent gain control is a snap to set up and execute with our Side Chain External button (SC Ext).
Use the Side Chain Monitor button (SC Mon) and your favorite EQ to dial in the specific frequencies you want to trigger the device.
As has become our standard, the contour switch allows entire mixes to be easily smoothed with soft compression while keeping low frequencies from punching holes in the overall mix.
Selectable input and output metering allow you to make sure that everything is matched up level-wise, maximizing your signal-to-noise ratio.

For overall speaker protection, our new PeakStopPlus™ does all previous circuits one better.
With a new design, the PeakStopPlus represses those unwanted transients from blowing your drivers while minimizing the distortion common to many other "hard" limiters. Selectable Hard-Knee or OverEasy® characteristics make the 1066 ideal for your gain control needs, whether you're looking for "heavy" almost-special-effects compression or soft, smooth gain leveling.
New lightpipe technology replaces standard LED's found on most other units, making the 1066 both very easy to read and much easier to operate.

In the studio, broadcast facility or on the road with a P.A. system, the 1066 is designed for perfectly simple operation.
The 1066 allows you to eliminate unwanted signals, flexibly control overall signal gain and guard your overall mix in dual mono or stereo operation.

At the heart of the 1066 is our new dbx V2 VCA.
Developed especially for the 1066, 1046 and other 10 series products to come, this revolutionary VCA boasts superb dynamic range characteristics while maintaining very low distortion and almost immeasurable noise characteristics. The bottom line is this: a new VCA working in conjunction with world class design makes the dbx 1066 perform better than compressors selling for hundreds more.

State-of-the-technology VCA's, meticulous component selection, and scrupulous testing procedures are just a few more reasons that the new dbx 1066 is the latest in a long line of pedigreed dbx signal processors.


Technical specifications

- Selectable auto (classic dbx®) or manual (variable Attack and Release) compression
- Contour switch removes unwanted low frequency information from detector circuit
- Selectable Overeasy® or Hard Knee compression modes
- PeakStopPlus™ limiting for setting maximum allowable level with minimal distortion
- SC Ext and SC Mon for setting up and monitoring external devices for gating function
- True differentially balanced gold-plated XLR and 1/4" inputs and outputs
- True RMS level detection
- Precision metering of input level, output level, and gain reduction
- rue stereo or dual mono operation
- Switchable +4 dBu or -10 dBV operation per channel

INPUT

Connectors:
XLR and 1/4" TRS (Pin 2 and tip hot)
Type:
Electronically balanced/unbalanced, RF filtered
Impedance:
Balanced > 50 kOohm, unbalanced >25 kohm
Maximum Input Level:
> +24 dBu balanced or unbalanced
CMRR:
Typically >50 dB at 1 kHz

OUTPUT

Connectors:
XLR and 1/4" TRS (Pin 2 and tip hot)
Type:
Servo-balanced/unbalanced, RF filtered
Impedance:
Balanced 120 Ohm, unbalanced 60 Ohm
Max Output Level:
> +21 dBm balanced, > +20 dBm unbalanced

SIDECHAIN INPUT

Connector:
1/4" TS
Type:
Unbalanced, RF filtered
Impedance:
>10 kohm
Max Input Level:
>+24 dBu

SIDECHAIN OUTPUT

Connector:
1/4" TRS (tip hot)
Type:
Impedance balanced, RF filtered
Impedance:
Balanced 2 kOhm, unbalanced 1 kohm
Max Input Level:
>+21 dBu balanced or unbalanced

SYSTEM PERFORMANCE

Bandwidth:
20 Hz to 20 kHz, +0/0.5 dB
Frequency Response:
0.35 Hz to 90 kHz, +0/-3 dB
Noise:
< -96 dBu, unweighted, 22 kHz measurement bandwidth
Dynamic Range:
> 118 dB, unweighted
THD + Noise:
0.008% typical at +4 dBu, 1 kHz, unity gain
0.08% typical at +20 dBu, 1 kHz, unity gain
< 0.1% any amount of compression up to 40 dB, 1 kHz
IMD:
< 0.1% SMPTE
Interchannel Crosstalk:
< -80 dB, 20 Hz to 20 kHz
Stereo Coupling:
True RMS Power Summing™

COMPRESSOR

Threshold Range:
-40 dBu to +20 dBu
Ratio:
1:1 to infinity:1
Threshold Characteristic:
Selectable OverEasy® or hard knee
Attack/Release Chracteristic:
Auto Dynamic™
Attack/Release Modes:
Selectable Manual or Auto
Manual Attack Time::
Scalable program-dependent
Manual Release time:
Scalable program-dependent
Auto Attack Time:
Program-dependent
Auto Release Time:
Program-dependent
Output Gain:
-20 to +20 dB

LIMITER

Threshold Range:
+4 dBu to +24 dBu (off)
Ratio:
infinity:1
Limiter Type:
PeakStopPlus™ two-stage limiter
Stage 1:
PeakStop™ brickwall limiter
Attack time:
Zero
Release Time:
Zero
Stage 2:
Predictive intelligent program limiter
Attack Time:
Program-dependent
Release Time:
Program-dependent

EXPANDER/GATE

Threshold Range:
Off to +15 dBu
Ratio:
1:1 to 30:1
Attack Time:
< 100 µsec
Release Time:
Program-dependent

FUNCTION SWITCHES

SC Ext.:
Routes the external sidechain input signal to the detector
SC Mon:
Routes the sidechain signal to the output, interrupting the normal audio
OverEasy®:
Activates the OverEasy compression function
Contour:
Activates the frequency-dependent detector function
Auto:
Activates automatic program-dependent attack and release times, disabling the manual Attack and Release controls
I/O Meter:
Switches between monitoring input and output levels on the Input/Output Level meter
Bypass:
Activates the direct input-to-output hard-wire relay bypass. Relay automatically hard-wire bypasses unit at power-down and provides a power-on delay of 1.5 sec
Operating Level (rear panel):
Switches the nominal operating level between -10 dBV and +4 dBu simultaneoulsy for both input and output levels
ST Link:
Link both channels for stereo operation. Channel One becomes the master

INDICATORS

Gain Reduction Meter:
12-segment LED bar graph at 1, 2, 4, 6, 9, 12, 15, 18, 21, 24, 27 and 30 dB
Input/Output Meter:
8-segment LED bar graph at -24, -18, -12, -6, 0, +6, +12, and +18 dBu
Compressor Threshold Meter:
3-segment LED bar graph at Below (-), OverEasy and Above (+)
Exp/Gate Threshold Meter:
2-segment LED bar graph at Below (-) and Above (+)
Limiter, Threshold Meter:
1 LED to indicate PeakStopPlus™ limiting
Function Switches:
LED indicator for each front-panel switch
OPTIONS - Output Transformer
Per Channel:
Jensen® JT-123-dbx or JT-11-dbx, BCI RE-123-dbx or RE-11-dbx

POWER SUPPLY

Operating Voltage:
100-120 VAC 50/60 Hz 200-240 VAC 50/60 Hz
Power Consumption:
20 Watts
Fuse:
100-120 VAC: 250 mA Slow Blow
200-240 VAC: 125 mA Type T
Mains Connection:
IEC receptacle

PHYSICAL

Dimensions:
1.75" H x 19" W x 9" D (4.4 cmx48.3 cmx20.1 cm)

Weight:
5.1 lbs (2.3 kg)
Lisätietoja
Valmistajan TuotenumeroST
Tuotelinkithttps://dbxpro.com/en-US
Write Your Own Review
Olet arvostelemassa:DBX 1066 Dual compressor limiter gate, selectable

Lisää tältä tuotemerkiltä

  1. DBX 160A Mono kompressori/limitteri overeasy ja
    DBX 160A Mono kompressori/limitteri overeasy ja
    Tuotenro: 309835
    Toimitus 2-14 vrk
    498,00 €
  2. DBX 166XS Kompressori Limitteri On kaksi
    DBX 166XS Kompressori Limitteri On kaksi
    Tuotenro: 309836
    Toimitus 2-14 vrk
    155,00 €
  3. DBX 234S Stereo 2/3 tie jakosuodin, erittäin
    DBX 234S Stereo 2/3 tie jakosuodin, erittäin
    Tuotenro: 309839
    Toimitus 2-14 vrk
    173,00 €
  4. DBX 266XS Hopea värinen klassinen kompressori
    DBX 266XS Hopea värinen klassinen kompressori
    Tuotenro: 309840
    Toimitus 2-14 vrk
    118,00 €
  5. DBX 286S HOPEA mikrofoni etuaste ja prosessori Mic
    DBX 286S HOPEA mikrofoni etuaste ja prosessori Mic
    Tuotenro: 309841
    Toimitus 2-14 vrk
    177,00 €
  6. DBX 131S HOPEA Single 1x 31 kanavainen graafinen
    DBX 131S HOPEA Single 1x 31 kanavainen graafinen
    Tuotenro: 309845
    Toimitus 2-14 vrk
    137,00 €