- Peakx Plus™ Limiters provide the ultimate in system performance and protection by allowing full control over threshold, attack, and release
- Enhanced Subharmonic Synth section provides user control over frequency, gain and filter type for system-specific tuning
- 3 User-defined fan mode controls – normal, early and fullspeed – for matching fan performance to a specific application
- New system monitoring provides software visibility of AC line voltage and power supply temperature
- Integrated cast-aluminum handles for easy handling and enhanced durability
- Locking power cord clip provides a secure connection between the amplifier and power cord
- Updated HiQnet System Architect™ control software
- Increased number of presets to a total of 50; 49 of which are user definable
CROWN XTI-1002 DSP päätevahvistin 2x 500W 4ohms ja 2x700W 2ohm
Sku
213685
XTI-1002 DSP amplifier 2x 500W 4ohms, 2x 700W 2ohms. CROWN XTi Series soveltuu erinomaisesti uuden sukupolven kompakteille PA-kaiuttimille, kuten JBL VRX900 Line Array- ja SRX700- sarjat. Vahvistimen sisäänrakennetussa DSP:ssä on kaikki tarpeelliset työkalut PA:n viritykseen; jakosuodin, EQ,limitointi ja vaiheistusviive. Lisäksi DBX:n patentoitu Subharmonic Synthesizer-toiminto mahdollistaa bassotoiston virityksen oktaavin alemmas.
VAT 24% | 0%
€598.00
Helsinki store:0 pcs
Supplier stock:
Usually 5-10 days lead time
Shipping only: €7.90 - Or pickup from store!
XTI SERIES XTI-1002 DSP amplifier 2x 500W 4ohms, 2x 700W 2ohms The Power to Move You
Features
Downloads
Size | ||||
XTi 1002 Cut Sheet | 477 KB | |||
XTi 1002 Owner's Manual | 3.29 MB | |||
XTi 1002 Owner's Manual-Chinese | 3.91 MB | |||
Software |
||||
HiQnet Band Manager™ | 55.6 MB | |||
HiQnet Audio Architect™ | ||||
Declaration Of Conformities |
||||
XTi2 Series Declaration of Conformity | 55.3 KB | |||
System Technology Bulletins |
||||
STB XTi-CDi-DSi Restoring Default #0003 | 695 KB | |||
STB XTi-CDi-DSi Common term definitions #0005 | 488 KB | |||
STB XTi-CDi-DSi Fan Config #0001 | 437 KB | |||
STB XTi-CDi-DSi Front Panel Lockout #0004 | 673 KB | |||
STB XTi-CDi-DSi USB Communication #0002 | 572 KB | |||
Power Draw & Thermal Dissipation Specs |
||||
XTi2 Power Draw & Thermal | 114 KB |
Specifications
Channels | 2 |
Sensitivity | 1.4V |
Rated Power Output (per channel) | 700W 2Ω, 500W 4Ω, 275W 8Ω |
Signal to Noise Ratio (below rated 1 kHz power at 8 ohms) | 100 dB (A-weighted) |
THD | < 0.5% |
Frequency Response (at 1W, 20 Hz - 20 kHz) | + 0 dB, -1 dB |
Crosstalk (below rated power) 20 Hz to 1 kHz | >70 dB |
Dimensions | 3.5" x 19" x 12.25" |
Weight | 18.5 lbs (8.4 kg) |
Shipping Weight | 21.5 lbs (9.8 kg) |
IEC Power Connector | 15A |
Manufacturer Sku | 5CRXTI1002 |
---|---|
Productlinks | https://www.crownaudio.com/amp_htm/xti2.htm |
Write Your Own Review