Main components

• 10-inch, front-firing, glass-composite low-frequency transducer
• Front-firing, bass-reflex acoustic port

Controls and filters

• Input gain control (-30 dB to +6 dB, continuously variable)
• Continuously variable lowpass filter (50 Hz to 130 Hz)
• Built-in crossover
• Switchable highpass filter removes frequency content below 80 Hz from the full-range signal sent from the Temblor outputs to the main monitors
• Momentary footswitch (included) bypasses the subwoofer, highpass filter, and Sub Out
• Polarity invert
• Ground-lift switch

Power and safety

• 250 watt, Class AB amplification
• Internal damping and heat sink
• Integrated rubber feet for stable placement

Inputs and outputs

• Left and right, balanced XLR and ¼” TRS and unbalanced RCA main inputs
• Left and right balanced XLR and ¼” TRS outputs
• XLR subwoofer output for connecting a second Temblor^® T10

Technical Specifications

Inputs

2- Balanced XLR
2- Balanced ¼” TRS
2- Unbalanced RCA

Outputs

2- Balanced XLR (full range with 80 Hz HPF option)
2- Balanced ¼” TRS (full range with 80 Hz HPF option)
1- Balanced XLR (Sub Out)

Performance
Frequency Response 20 Hz – 200 Hz
Low Pass Filter Frequency 50 – 130 Hz (variable)
Signal-to-Noise Ratio >98 dB (A weighted)
THD 0.019% @ power <160W
Amplifier Power 250W peak, 170W RMS
Power Consumption 230W
Amplifier Type Class AB
Peak SPL at 1m 113 dB
Woofer 10” glass-composite, front-firing
Acoustic Port Front-firing bass reflex

User Controls

Input Gain Range -30 to +6 dB
Polarity Switch 0° or 180°
Low Pass Filter Control 50 Hz to 130 Hz
Ground Lift Switch On/Off
High Pass Filter Switch On/Off
Bypass Footswitch On/Off

Protection

RF interference
Output-current limiting
Over-temperature
Turn-on/off transient
Subsonic filter
External mains fuse

Power

100-120V ~50/60 Hz or 220-240V ~50/60 Hz

Cabinet

Vinyl-laminated MDF

Physical

Width 12.6” (320 mm)
Depth 15.75” (400 mm)
Height 15.75” (400 mm)
Weight 39.46 lbs (17.9 kg)