PSSO QCA-6400 4-kanavainen päätevahvistin 6400W

Sku
266659

QCA-6400 4-kanavainen päätevahvistin 6400W kevyt paino ja pieni koko kiitos integroidun virtalähteen, käynnistysviive, stereo-, rinnan- tai sillattu toiminta. Neljä tasonsäädintä tarkkaan tasonsäätöön. Sisääntulon herkkyys säädettävissä. Suojattu oikosululta, ylilämpeämiseltä, klippaukselta, ylikuormalta, suoralta jännitteeltä ja VHF-signaaleilta. Sisääntulot XLR:llä, jokaisessa läpivienti XLR:ään, kaiutinlähdöt speakon liittimillä. Mitat: 483 x 445 x 89 mm Paino: 15.5 kg

VAT 24% | 0%
€1,399.01
pcs
Available from central warehouse: 2-8 working days
Supplier stock:
In stock
For this product: Free Shipping!

QCA-6400 4-Channel SMPS Amplifier - 4-channel PA amplifier with integrated SMPS

Mahti pääte ammattikäyttöön!!

Soveltuu suuritehoisille subwoofereille! 

The 4-channel PA amplifiers of the QCA series offer ultra-high output power paired with a low weight and small overall height. The amplifiers use a patented second-generation Class I output circuitry which combines the high efficiency off Class D and the sound quality of Class A. Featuring a modern switch-mode power supply, the amplifiers provide up to 10 kW peak power and weigh less than 16 kg. This makes the series particularly attractive for mobile applications. The amplifiers can be used flexibly in stereo operation, parallel operation or in mono bridge operation. Extensive protective circuits will protect the amplifiers and the speakers connected.
Features

PA amplifier with SMPS, 4 x 1600 W / 2 ohms, 4 x 1400 W / 4 ohms

  • 4-channel PA amplifier with class I circuitry
  • 4 x 1400 W/4 ohms
  • Low weight and height due to integrated switch mode power supply
  • Reliable power amp with high impulse stability for a wide range of applications (e.g. compact PAs, multi-way PAs, international concerts)
  • Speaker switch-on delay
  • 3 operating modes can be selected (stereo, parallel or bridged)
  • 4 level controls for precise level adjustment
  • Input sensitivity adjustable
  • LED VU meter and LEDs for activated protective circuit (protect), overload (clip), and signal per channel
  • Complete protection set against short-circuit, overheat, clipping, overload, DC voltage and VHF signals
  • Highly efficient front-to-rear air routing
  • Electronically balanced inputs via XLR mounting jacks, with XLR feed-through outputs
  • Speaker outputs via lockable Speaker plugs
  • Rugged steel chassis with aluminum front panel
  • Rack installation with 2 units
  • Neutrik Speakon outputs
  • Height unit: 2 U
  • Power connection: Fixed Power supply cord with safety plug (M)
  • Housing design: (19") 48,3 cm rack installation
Technical specifications
Power output (RMS):
2 ohms 4 x 1600 W
4 ohms 4 x 1400 W
8 ohms 4 x 800 W
4 ohms bridged 2 x 3200 W
8 ohms bridged 2 x 2800 W
Signal-to-Noise ratio: >80 dB
Total harmonic distortion: <0.05 %
Damping factor: >800
Slew rate: >10 V/µsec
Crosstalk: >65 dB
Input sensitivity: 0.775 V/1.0 V/1.4 V/38 dB/32 dB/26 dB, switchable
Voltage gain: 40.3 dB (0.775 V), 38 dB (1.0 V), 35.1 dB (1.4 V)
Input impedance: 20 kohms (balanced), 10 kohms (unbalanced)
Input connectors: 4 x XLR
Output connectors: 4 x Speaker, 4 x XLR feed-through output
Protection: Overheat, overload, short-circuit, over-current, DC voltage, softstart, VHF signals
Cooling: 2 temperature-controlled fans, front-to-rear
Controls: Power switch, input attenuators, mode switch stereo/parallel/bridged, input sensitivity
LED indicators: Protect, clip, signal (per channel)
Construction: Steel chassis, aluminum front panel
Dimensions: 483 x 445 x 89 mm
Rack installation with 2 U
Power consumption: 820,00 W 1/8 power
Weight: 13,45 kg
Power/channel (8 Ohm): 800 W
Power/channel (4 Ohm): 1400 W
Frequency range: 20 - 20000 Hz
Height: 8,9 cm
Depth: 44,5 cm
Width: 48,3 cm
Power connection: Fixed Power supply cord with safety plug (M)
Power supply: 230 V AC, 50 Hz
More Information
Manufacturer Sku10451696
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account