SHURE ULXD4D Langaton Digitaalinen tupla

The new ULXD4D dual channel digital receiver packs two channels of wireless into one rack space, with individual gain controls, LED meters, and XLR outputs for each channel. Like the single-channel, half-rack ULXD4 digital receiver, the new dual and quad receivers feature fully digital audio processing and RF transmission as well as AES 256-bit encryption.
High Density Mode (designed for high channel count applications requiring a working range up to 30 metres), allows operating up to 560 (five hundred & sixty) channels in 72 MHz, respectively 63 channels in an 8 MHz TV channel. High Density mode optimizes the system’s output power and digital RF filtering to reduce its spectral footprint from 350 kHz to 125 kHz, with no loss of sound quality. This allows ULX-D systems be tuned to frequencies that are much closer together without interfering with each other. Even in Standard mode, up to 22 ULX-D systems can operate in 8 MHz.

Two receivers in a rugged 1RU metal chassis with internal power supply
Up to 72 MHz tuning range (region dependent)
Digital predictive switching diversity

High Density mode optimizes ULX-D systems to simultaneously operate significantly more channels in applications up to 30 meters
RF cascade ports allow distribution of RF signal to another unit
Optimized scanning automatically finds, prioritizes, and deploys the cleanest frequencies to be manually deployed to transmitters over IR sync
Bodypack Frequency

Diversity

ensures uninterrupted audio for mission-critical applications
AES 256-bit encryption-enabled for secure transmission
Audio summing routes both audio channels to each XLR receiver output
Dante™ digital networked audio over Ethernet
Individual gain controls, LED meters, and XLR outputs for each channel
Up to 60 dB independently adjustable gain for each channel
Ethernet networking for streamlined frequency


coordination and deployment across multiple receivers
Wireless Workbench® 6 (WWB6) software integration for advanced coordination, monitoring, and control
AMX and Crestron control
AXT600 Axient™ Spectrum Manager compatible
Interference detection and alerts provided on both the receiver and WWB6
Intuitive front panel LCD menu and controls with various options of lockout
Audio and RF LED meters with peak indicator
XLR connectors with switchable mic/line output level
Remoteable ½ wave antennas
Ethernet cable included

Power supply: 100 to 240 V AC, 50-60 Hz, 0,26 A max.
Battery status: Yes
Further specs:
RF INPUT
•Spurious Rejection >80 dB, typical
•Connector Type: BNC
•Impedance

: 50 Ù
•Bias Voltage: 12 - 13 V DC, 150 mA maximum, per antenna

AUDIO OUTPUT
•Gain Adjustment Range: -18 to +42 dB in 1 dB steps (plus Mute setting)
•Configuration: XLR: Balanced (1=ground, 2=audio +, 3=audio -)
•Impedance

: 100 Ù
•Full Scale Output: LINE setting= +18 dBV, MIC setting= -12 dBV
•Mic/Line Switch: 30 dB pad
•Phantom Power


Protection: Yes

NETWORKING
•Network Interface: Dual Port Ethernet 10/100 Mbps, 1 Gbps
•Network Addressing Capability: DHCP or Manual IP address
•Maximum Ethernet Cable Length: 100 m
•Integration to Soundcraft VI Series Consoles

RF CASCADE OUTPUT
•Connector Type: BNC: For connection of 1 additional receiver
•Configuration: Unbalanced, passive
•Impedance

: 50 Ù

ADDITIONAL SPECS
•Dimensions: 44 mm x 482 mm x 274 mm, H x W x D
•Weight: 3,45 kg, without antennas
•Housing: Steel; Extruded Aluminum
•Power Requirements: 100 to 240 V AC, 50-60 Hz, 0,32 A max