MONACOR RBT-35SR Tweeter 12W RMS 7, 1100-30000Hz
Sku
702890
RBT-35SR Tweeter 12W RMS 7?, 1100-30000Hz 96dB/W/m
VAT 24% | 0%
€305.00
Wholesale pack size: 12 pcs
Helsinki store:0 pcs
Supplier stock:
Ready to be dispatched in 5-10 working days
Shipping only: €7.90 - Or pickup from store!
The new high-end tweeters RBT-10, RBT-20 and RBT-35SR
are part of the so-called real ribbon tweeters. The audio signal flows through the entire cone which is of extra low weight and consists of an aluminium film. A built-in high-quality transformer converts the low impedance of this cone into 5-8 ? which is non-critical for the amplifier. Ribbon tweeters impress by an extra fine and brilliant reproduction of the high frequency range. Due to continuous further development, it is already possible to use these ribbon tweeters with crossover frequencies from 2,500 Hz on, depending on the type. This makes them a top choice whenever hi-fi speakers or studio monitors of the highest quality are required. Ribbon tweeters require a crossover network for operation!
Pair of high-end ribbon tweeters, matched, 12 W, 7 ?
Real ribbon tweeter with neodymium magnet system and transformer
Due to horn front attachment, a very high sound pressure and consistent radiation pattern
Fine and brilliant reproduction of the high frequency range
Smooth, unembossed aluminium sandwich cone: 9 x 60 x 0.015 mm
For use from 2,500 Hz on via 18 dB filter
Horn with mounting flange and protective grille
HOBBY HiFi 06/2014
"The waterfall graph shows a perfect and amazingly fast decay above the fundamental resonance frequency without any interference. ... this tweeter is a top solution for remarkably wide bandwidth applications."
Impedance (Z) 7 ?
Resonant frequency (fs)-
Max. frequency range 1,100-30,000 Hz
Rec. crossov. frequ. (fmax.) (12 dB/oct.)> 3,000 Hz
Music power 25 WMAX
Power rating (P) 12 WRMS
SPL (1 W/1 m) 96 dB
Radiation angle (vert./hor.)-
Voice coil diameter-
Magnet diameterneodymium rods
Mounting cutout 70x90 mm
Mounting depth 101 mm
Dimensions 98x110x101 mm
Weight 520 g
are part of the so-called real ribbon tweeters. The audio signal flows through the entire cone which is of extra low weight and consists of an aluminium film. A built-in high-quality transformer converts the low impedance of this cone into 5-8 ? which is non-critical for the amplifier. Ribbon tweeters impress by an extra fine and brilliant reproduction of the high frequency range. Due to continuous further development, it is already possible to use these ribbon tweeters with crossover frequencies from 2,500 Hz on, depending on the type. This makes them a top choice whenever hi-fi speakers or studio monitors of the highest quality are required. Ribbon tweeters require a crossover network for operation!
Pair of high-end ribbon tweeters, matched, 12 W, 7 ?
Real ribbon tweeter with neodymium magnet system and transformer
Due to horn front attachment, a very high sound pressure and consistent radiation pattern
Fine and brilliant reproduction of the high frequency range
Smooth, unembossed aluminium sandwich cone: 9 x 60 x 0.015 mm
For use from 2,500 Hz on via 18 dB filter
Horn with mounting flange and protective grille
HOBBY HiFi 06/2014
"The waterfall graph shows a perfect and amazingly fast decay above the fundamental resonance frequency without any interference. ... this tweeter is a top solution for remarkably wide bandwidth applications."
Impedance (Z) 7 ?
Resonant frequency (fs)-
Max. frequency range 1,100-30,000 Hz
Rec. crossov. frequ. (fmax.) (12 dB/oct.)> 3,000 Hz
Music power 25 WMAX
Power rating (P) 12 WRMS
SPL (1 W/1 m) 96 dB
Radiation angle (vert./hor.)-
Voice coil diameter-
Magnet diameterneodymium rods
Mounting cutout 70x90 mm
Mounting depth 101 mm
Dimensions 98x110x101 mm
Weight 520 g
Manufacturer Sku | 105720 |
---|---|
EAN | 4007754239737 |
Special price to date | Jul 24, 2022 |
Productlinks | https://www.monacor.de/ |
Write Your Own Review