PORTABILITY
There is more demand now than ever for agile sound systems that deliver a similar experience to fixed installation ply wood cabinets. Mobile DJs and bands need to pack everything down into one vehicle while conference rooms need to cater for loud presentations where equipment can be discreet. The Titan range is designed for these applications, without faltering in sound whatsoever. Wharfedale Pro have achieved this by using state of the art, gas assist injection moulding technology, plus an internal laminar flow rib pattern, increasing rigidity and reducing its weight compared with standard injection moulded enclosures.
INDOOR AND OUTDOOR INSTALLATION
Although the product weight and rubberised handles are perfect for the mobile musician, this technology also lends itself to installations where weight is an issue, not to mention that the dynamic polypropylene material and moisture proof LF drivers can withstand outdoor conditions. Additional protection can be found with the Titan Tourbags, custom made speaker bags with a unzippable front panel meaning your Titan X15 loudspeaker is always protected.
ENHANCED HIGH FREQUENCY
The high-frequency section has been completely reevaluated in the Titan X15 for both coverage and sound quality. Firstly the HF unit has been strengthened via a rear aluminium cover, which improves heat dissipation for high-pressure audio during prolonged time periods. Wharfedale Pro engineers have paid particular attention to the acoustic properties of the new HF to ensure a much smoother sound, especially at high output. While the high frequencies are clear and detailed, a new custom phase plug has been formed for dimensional stability and accurate phase coherence. Combined with the hybrid symmetry horn, the full range sound of Titan X15 is heard loud and clear to everyone in the crowd.
SPECIFICATIONS
System Type | Passive |
Configuration | 15" 2-way |
Frequency Response (+/-3dB) | 50Hz-20kHz |
Frequency Range (- 10 dB) | 40Hz-20kHz |
Sensitivity (2.83v/1m) | 97dB |
Calculated Maximum SPL @1m | 129dB |
System Rated Impedance | 8Ω |
Low Frequency Transducer | |
Size | 381mm / 15" |
Voice-Coil Size | 75mm / 3.0" |
Rated Impedance | 8Ω |
LF Power (re:AES2-2012) | 400W |
High Frequency Transducer | |
HF Driver Type | Compression Driver |
Voice-Coil Size | 44mm / 1.75" |
Exit Size | 25mm / 1" |
Diaphragm Material | Titanium |
Rated Impedance | 8Ω |
HF Power (re:AES2-2012) | 40W |
Nominal Coverage (H x V) | Hybrid Symmetry Horn 100°x80° |
Power | |
System Continuous Power | 400w |
System Programme Power | 800W |
System Peak Power | 1600w |
Crossover frequency | 2.7kHz |
Input Connector | 2 x NL4 (speakON compatible) |
Hardware | 35mm Speaker Pole Insert with lock screw 2 handles on sides M8 x 10 rigging points |
Enclosure | |
Enclosure Material | Trapezoidal / Polypropylene |
Finish | Black / white |
Grille Material & Finish | 1.2 steel |
Dimensions - Unpacked | |
Height | 728.5mm / 28.7" |
Width Front | 480.6mm / 18.9" |
Width Rear | 480.6mm / 18.9" |
Depth | 395.6mm / 15.6" |
Dimensions - Packed | |
Height | 830mm / 32.7" |
Width Front | 514mm / 20.2" |
Width Rear | 514mm / 20.2" |
Depth | 489mm / 19.3" |
Weight | |
Net Weight | 22.0kg / 48.4lbs |
Gross Weight | 26.8kg / 59.0lbs |