JBL STX835 2x 15 3-tie passiivi-PA-kaiutin MF/HF

STX800-tuotesarja on suuniteltu yhdistävän kevyet PA-kaiuttimet täysikokoiseksi kiertueäänentoistolaitteistoksi.
Tämän tuotesarjan päätavoitteena on tarjota korkeaa taajuusjärjestelmää ja suorituskykyä vaativiinkin paikkoihin.
Kehitetyt konsertti-ystävälliset lattia- ja sivumonitorit täydentävät edullisesti mitä tahansa äänentoistojärjestelmää.
Neljä täyden kantomatkan PA-kaiutinta yhdistettynä kahteen bassokaiuttimeen (subwoofer), STX –tuotesarja on järkevin valinta kattamaan kiertue- ja klubiäänentoistolaitteiston.


2x 15” 3-tie PA-kaiutin MF/HF lohkolla, torvikaiuttimella, CMCD™ ajurilla, koteloidulla alapäällä, 1.6mm paksulla teräskehikolla ja DuraFlex™ kotelolla

Ominaisuudet

- Taajuusalue (-10 dB): 32 Hz-20 kHz
- Taajuusvaste (±3 dB): 43 Hz-20 kHz
- Kattavuus: 60? × 40? nominal
- Herkkyys (1W/1m): 96 dB
- Teho: 1600 W / 3200 W / 6400 W (jatkuva/Program/Piikki)
- Maksimi äänenvoimakkuus: 134 dB:n SPL piikki
- Nimellinen impedanssi: 4 Ohmia
- Sisääntuloliitännät: Kaksi NL4
- Toimintajärjestelmä: Full Range/Bi-Amp with internal passive mid-high crossover network
- Mitat: 1066 mm x 568 mm x 573 mm
- Paino: 57.1 kg


The STX800 Series was designed to bridge the space between light-duty portable PA speakers and flown full-size line array tour sound systems.
Our goals at the inception of this project were simple: Offer a high performance, high density system solution in a truck-pack friendly format.
Develop concert-worthy floor monitors and side fills that could affordably complement any touring sound system.
Deliver an affordable, great sounding subwoofer that could reproduce true low frequency at elevated sound pressure levels.
With four full-range systems and two subwoofers, the STX Series can cover just about any professional application.
Whether you’re in need of ancillary speakers for a full-blown tour sound system, ground-stacking for a live concert performance, installing speakers in dance clubs or performance venues, touring clubs with your band, or you are a performing mobile DJ, STX800 Series is the smart choice.


STX835 Dual 15" Three-Way with Horn-Loaded MF/HF section, slot-loaded LF

Key Features

- Premium passive loudspeaker system
- Very high power handling
- Two 380 mm (15 in) Vented Gap Cooled™ low-frequency drivers, in slot-loaded LF configuration
- CMCD™ Cone Midrange Compression Driver™ provides low midrange distortion, increased sensitivity, extended bandwidth and improved phase coherence.
- 60° x 40° coverage.
- Bi-amplified or full-range passive operation.
- Twelve M10 suspension points


Applications

- Reinforcement of vocal and instrumental music requiring low frequency extension
- Dance music playback


The STX835 combines the performance of a subwoofer-equipped system with single-enclosure ease of use.
The dual slot-loaded 2226H 360 mm (15 in) patented Vented Gap Cooled™ woofers deliver impressive low-frequency extension without a sub.
The mid-range is covered by JBL’s patented CMCD™ Cone Midrange Compression Driver™ technology using a 2169H 203 mm (8 in) driver.
The CMCD design provides very low midrange distortion, increased sensitivity, extended bandwidth and improved phase coherence.
The multiband, Progressive Transition waveguide assembly also hosts a 75 mm (3 in) voice coil 2432H compression driver.

For applications requiring suspension, the enclosure is fitted with twelve M10 suspension points.

The enclosure is constructed of top quality birch/poplar laminate plywood and coated in JBL’s rugged DuraFlex™ finish.
The attractive CNC-machined, 14-gauge steel grille wraps around the sides of the enclosure so there are no protruding lips on the front of the box to create acoustical interference.
The grilles are internally lined with acoustically transparent foam to provide additional driver protection and give a very professional appearance.


Technical specifications

System Type: Dual 15", three-way, slot-loaded LF
Frequency Range (-10 dB): 32 Hz - 20 kHz
Frequency Response (±3 dB): 43 Hz - 20 kHz

Coverage Pattern: 60° x 40° nominal

Crossover Modes: Bi-amp / passive, externally switchable
Crossover Frequencies: 2 kHz / 250 Hz

Power Rating Passive (Continuous/ Program/ Peak)
- 1600 W / 3200W / 6400 W
- Bi-amp LF: 1600 W / 3200W / 6400 W
- Bi-amp MF/HF: 350W / 700W / 1400W

Maximum SPL: 134 dB SPL peak
System Sensitivity (1w @ 1m): 96 dB SPL (passive mode)
Mid / High Sensitivity (1w @ 1m): 108 dB SPL (bi-amp mode)

LF Driver: 2 x JBL 2226H 380 mm (15 in) Vented Gap Cooled™ woofer
MF Driver: 1 x JBL CMCD-82H Cone Midrange Compression Driver with integral 2169H 200 mm (8 in) Differential Drive® driver
HF Driver: 1 x JBL 2432H 75 mm (3 in) voice coil, neodymium compression driver

Nominal Impedance
- Passive: 4 ohms
- Bi-amp LF: 4 ohms
- Bi-amp HF: 8 ohms

Active Tunings
- Designed for Crown amplifiers and dbx DriveRack.
- Settings available at www.jblpro.com

Enclosure: Trapezoidal, 18 mm, 13-ply birch/poplar laminate plywood
Suspension / Mounting: 12 x suspension points, M10.
Transport: 2 side handles
Finish: Black DuraFlex™ finish
Grille: Powder coated, black, 14-gauge perforated steel with transparent charcoal foam backing.

Input Connectors Neutrik® Speakon® NL-4 (x2)

Dimensions (H x W x D): 1066 x 568 x 573 mm (42.0 x 22.4 x 22.6 in)
Net Weight: 57.1 kg (126 lbs.)

Optional Accessories: 229-00009-01: 3x 10 mm forged eyebolts kit
For covers, go to www.jbl.com