JBL JRX215 2-tie passiivikaiutin 15 RMS 250/1000W
JRX215 2-tie passiivikaiutin 15" RMS 250/1000W, 8Ohm, max. SPL 129dB, Herkkyys 98dB.
JRX 215 on edullinen live-ja puhekäyttöön sekä musiikin toistoon suunniteltu kaiutin.
Siinä on selkeä ja luonnollinen keskialue erityisesti laulu- ja puhekäytössä.
Laajan taajuusvasteen ansiosta kaiutin soveltuu hyvin myös DJ:lle.
Valurunkoinen bassoelementti, ferrofluid-jäähdytteinen diskanttidriver Progressive Transition-torvessa.
35mm dualtelineadapteri.
- 2-tie pa-kaiutin
- 1 x 1" compression driveri
- 1 x 15" basso
- impedanssi 8 ohmia
- tehonkesto 250 W jatkuva teho/ peak 1000 W
- suuntaavuus 90º x 50º
- toistoalue 38 Hz - 16 kHz
- jakotaajuus 1.6 kHz
- herkkyys (1w/1m) 98 dB
- maksimi äänenpaine 128 dB
- kotelo 19mm MDF-levyä mattopinnoitteella
- mitat 699 mm x 460 mm x 432 mm
- paino 27,4 kg
Suositeltava vahvistin 250-500W 8 ohmia
JRX215
Two-Way
Sound Reinforcement
Loudspeaker System
This trapezoidal, 15" speaker system is at home in live sound, dance music and speech reinforcement.
Features
JBL 15 in low frequency driver with a 64 mm (2.5 in) diameter edgewound ribbon voice coil which provides more cross-sectional wire area in the voice coil gap than round wire designs, for greater efficiency and power handling.
JBL 2414H-C 25 mm (1 in ) polymer diaphragm compression driver improves high frequency performance as well as system reliability.
The advanced network topology crossover design shapes the frequency response to deliver coherent summation in the crossover region.
High-voltage capacitors and inductors with massive cores and heavy gauge wire enable the crossover network to handle high power without saturating.
Progressive Transition™ high frequency waveguide provides superior coverage control, reduced distortion, and smoother frequency response.
The rugged, acoustically superior enclosure is constructed from 19 mm (.75 in ) MDF (Medium Density Fiberboard) using advanced adhesives and mechanical fastener technology for extreme durability and improved low-frequency performance.
SonicGuard™ protects the high frequency driver from excess power without interrupting the performance.
Non-resonant, all-steel handles are used.
Attractive 18-gauge perforated, steel grille protects components from damage.
Dual-angle pole-mount socket allows the speakers to tilt 10° for more uniform audience coverage
Specifications
System Type: 15" 2-way, sound reinforcement speaker
Frequency Range (-10 dB):2 38 Hz - 16 kHz
Frequency Response (±3 dB):2 50 Hz – 12.5 kHz
Sensitivity (1w/1m): 98 dB SPL
Nominal Impedance: 8 Ohms
Power Capacity:1 250 watts
Peak Power Capacity:1 1000 watts
Recommended Amplifier Power 250-500 watts @ 8 Ohms
Maximum SPL: 128 dB
Nominal Dispersion: 90° x 50°
Crossover Frequency: 1.6 kHz
Dimensions (H x W x D):3 699 mm x 460 mm x 432 mm (27.5 in x 18.1 in x 17 in)
Weight: 27.4 kg (60.5 lb)
Shipping Weight: 30.4 kg (67 lb)
High Frequency Driver: JBL 2412, 1" exit compression driver mounted on Progressive Transition™ Waveguide
Low Frequency Driver: JBL M115-8A
Input Connectors: Parallel Neutrik® Speakon® NL-4 (x1); ¼" TS phone jack (x1)
Enclosure Construction: 19 mm (¾ in) MDF (Medium Density Fiberboard); with glued and mechanically fastened joint detail; covered in black carpet.
Grille: 18-gauge, powder-coated steel
Mounting & Suspension: 36 mm, dual-angle pole-mount socket
Valmistajan Tuotenumero | 4JBJR215 |
---|---|
EAN | 050036904506 |
Specialpris hittills | 23 nov. 2021 |
Produktlänkar | http://www.jblpro.com/www/products/portable-market/jrx200-series/jrx215#.U70FK2eKBoI |