215 Dual 15-band graphic equalizer

The dbx® 2-Series Graphic Equalizers have been designed to meet the needs of the most demanding sound reinforcement environments, while offering the simplicity of straight forward controls.
The 215 not only provides standard features like dual channels, 15 2/3 octave bands, ISO frequency meters, +/- 12dB input gain range, and switchable 50 Hz/12 dB octave low-cut filters, but also includes other thoughtful features. These features include: 20 mm faders; selectable +/-6 dB or +/-12 dB boost/cut range for precise gain adjustments; XLR, and 1/4" TRS connectors for installation ease; balanced inputs and outputs for quiet operation; and chassis/signal ground lift capabilities for quick hum isolation. The visionary design of the dbx® 2-Series has been pursued to make your job easier.

The 2-Series represents a major step forward in the performance of entry-level graphic equalizers. From its amazing 10 Hz to 50 kHz frequency response, to its 108 dB dynamic range, internal toroidal transformer, the 2-Series offers out of this world specifications wit a own to earth price point.
Sure to find a home in the studio, on tour and with installed sound venues, the 2-Series is destined to take its rightful place in tHe lineage of great dbx® signal processors that are the professional's choice in signal processing.
With such affordable quality, there's no longer any excuse for compromising your sound.

- Two 15-band, 2/3-octave Constant Q frequency bands
- Switchable boost/cut ranges of ±6 or ±12 dB
- 12 dB per octave, 3 dB down @ 50 Hz low-cut filter
- Front panel bypass switch
- ±12 dB input gain range
- 4-segment LED ladders for monitoring output levels
- XLR and TRS Inpts and Outputs
- Internal Toroidal Transformer
- Frequency Repsonse of <10 Hz to >50 kHz
- Dynamic range of greater than 108 dB

INPUT

Connectors:
1/4" TRS, female XLR (pin 2 hot)
Type:
Electronically balanced/unbalanced, RF filtered
Impedance:
Balanced 40 kohm, unbalanced 20 kohm
Max Input Level:
>+21 dBu balanced or unbalanced
CMRR:
>40 dB, typically >55 dB at 1 kHz

OUTPUTS

Connectors:
1/4" TRS, male XLR (pin 2 hot)
Type:
Impedance-balanaced/unbalanced, RF filtered
Impedance:
Balanced 100 Ohm, unbalanced 50 Ohm
Max Output Level:
>+21 dBu balanced/unbalanced into 2 kohm or greater
>+18 dBm balanced/unbalanced (into 600 Ohm)

SYSTEM PERFORMANCE

Bandwidth:
20 Hz to 20 kHz, +0.5/-1 dB
Frequency Response:
<10 Hz to >50 kHz, +0.5/-3 dB
Dynamic Range:
108 dB
Signal-to-Noise:
90 dB
THD+Noise:
<0.004%
Interchannel Crosstalk:
<-80 dB, 20 Hz to 20 kHz

FUNCTION SWITCHES

EQ Bypass:
Bypasses the graphic equalizer section in the signal path
Low Cut:
Activates the 50Hz 12dB/octave high-pass filter
Range:
Selects either +/- 6 dB or +/- 12 dB slider boost/cut range

POWER SUPPLY

Operating Voltage:
100 VAC 50/60 Hz, 120 VAC 60 Hz, 230 VAC 50/60 Hz
Power consumption:
12 W
Main Connection:
IEC receptacle

Mer information