[POISTUNUT] MADRIX NEBULA USB and Artnet interface to control pixels of LED strips, LED stripes, and LED tape
Artikelnummer
591769
MADRIX Nebula on näppärä työkalu pikselien ohjaukseen 8- universumia DMX 4096 kanavaa
USB- ARTNET Led nauhat, stripit. Sopii kiskoon tai minne vain 5V- 12V- 24V jännitteet.
Moms 24% | 0%
428,00 €
Helsingfors butik:0 st
Leverantörens lager:
Out of stock
(Tillgänglig ca 12 veckor)
(Tillgänglig ca 12 veckor)
Leverans bara: 7,90 € - Or pickup from store!
USB and Artnet interface to control pixels of LED strips, LED stripes, and LED tape
- MADRIX NEBULA is a hardware interface to control your digital LED strips, LED stripes, and LED tape
- Supports a wide range of LEDs: APA101 / APA102 / APA104 / APA106 / GS8207 / GW6201 / GW6205 / LPD1882S / LPD6803 / LPD8806 / MBI6120 / P9883 / SJ1221 / SK6812 / SK6822 / SM16703 / SM16716 / TLS3001 / TLS3008 / TM1804 / TM1809 / TM1812 / TM1814 / TM1829 / UCS1903 / UCS2903 / UCS512B3 / UCS8904 / UCS9812S / WS2801 / WS2803 / WS2811 / WS2811S / WS2812 / WS2812B / WS2813 / WS2815 / WS2818 / WS2822S / WS2822S Addressing (As of March 2019)
- Additional LED types will be supported with future firmware updates
- Drives up to 1360 RGB pixels (8 DMX universes / 4096 DMX Channels / 4096 single-color pixels / 1024 RGBW pixels) distributed equally over 2 ports
- Supports a signal frequency of up to 24 MHz
- The output protocol can be set separately for each of the 2 ports
- Directly connects to the LEDs via 4-pin, pluggable screw terminals
- Provides flexible power options: over USB (5 V) or via screw terminal (5 V to 24 V / 12 A) as well as routing through to LEDs with up to 6 A maximum load per port with various options on how to connect LEDs, power, and MADRIX NEBULA
- Receives data over Ethernet network (Art-Net and/or Streaming ACN)
- Can also be used as MADRIX USB interface
- Works great with the MADRIX Software (sold separately) with quick and easy installation
- Sync Mode: MADRIX Software and hardware allow you to synchronize Art-Net data for all output ports and even across multiple devices to get an optimal image on the LEDs without visual interruptions
- Complies with the official protocol specifications and can be used as regular network unit with other 3rd-party consoles, controllers, or software solutions
- Automatic HTP merging for two Ethernet sources
- 2 Ethernet ports with daisy-chain support for the data connection without using a separate network switch or router
- Useful settings for channels per universe, channel offset, channel order, and output in case of network connection loss, and more
- 9 status LEDs, which can be turned off
- Built-in web page for simple on-device configuration
- Can be mounted on 35-mm DIN rails or walls via the provided wall-mount brackets
- Non-conductive enclosure with IP20 and UL94 V-O flammability rating
- Fanless, noiseless, and low-energy design
- Ready within seconds after startup
- Recommended for any small or large project
- Multiple devices can be used together without problems
- The firmware can be updated for future features
- Quick start guide / technical manual available in English and German
- User manuals also available at help.madrix.com
- Made in Germany
- More information available at www.madrix.com
- Made in Germany
Technical specifications
Power supply: | 5-24 V DC |
Power connection: | Mains input USB, type B Power supply cord for USB A mains connection (provided) |
DMX channels: | Output 4096 |
USB port: | USB 2.0, Typ B |
Width: | 7 cm |
Height: | 4,5 cm |
Depth: | 9,2 cm |
Weight: | 0,27 kg |
Packaging units
PU | EAN | Weight | Dimensions |
---|---|---|---|
1 | 4260263421189 | 0,36 kg | 19cm x 13,5cm x 5,5cm |
Catalog pages
Name | Version | Language |
---|---|---|
51860360-Page-115615-27.00-en.pdf (326 KB) | 27.00 | en |
51860360-Page-115178-27.00-de.pdf (325 KB) | 27.00 | de |
Data sheet
Name | Version | Language |
---|---|---|
51860360-Datasheet-125098-en.pdf (433 KB) | 0.000 | en |
Valmistajan Tuotenumero | 51860360 |
---|---|
EAN | 4260263421189 |
Write Your Own Review