[POISTUNUT] OMNITRONIC PAP-60 PA Amplifier 100V päätevahvistin 60W
Moms 24% | 0%
Helsingfors butik:0 st
Out of stock
Leverans bara: 7,90 € - Or pickup from store!
The Omnitronic PAP-60 ELA mixer amplifier is your reliable partner for ELA sound reinforcement systems. Thanks to its 19" format, it is ideal for both mobile and fixed installations.
Outputs for ELA loudspeakers with 70 V and 100 V audio carriers or 4-16- ? loudspeakers leave nothing to be desired. In addition to a line input, the PAP-60 also offers a loop-through output. Choose between XLR and 6.3 mm jack for both. So you're always flexible.
A fan protects the interior of your PAP-60 from overheating. In addition to a switch-on delay, it also features protection circuits against overload, short-circuit and DC voltage. In these cases, your loudspeakers are electrically isolated from the amplifier. Both the PAP-60 and your speakers are protected from damage.
PA power amplifier, 60 watts
- 1 line input (optionally XLR or 6.3 mm jack)
- 1 feed-through output (optionally XLR or 6.3 mm jack)
- 70 V, 100 V or 4-16 ohms operation
- Master control
- LED indicators for power, signal, clip and fault
- Protective circuits: over load, short circuit, turn-on delay, over heating, DC offset protection
- Load detection and power control
- Rack installation
|Power supply:||230 V AC, 50 Hz|
|Output power:||60 W RMS|
|Output current:||0.85 A/ 70 V, 0.6 A/ 100 V|
|Speaker outputs:||70 V, 100 V or 4-16 ohms|
|Input connectors:||XLR, 6.3 mm jack mounting socket|
|Output connectors:||XLR, 6.3 mm jack mounting socket|
|Line input:||800 mV, 10 kohms|
|Frequency range:||60 Hz - 16 kHz|
|Distortion:||0.5 %/ 1 kHz|
|S/N ratio (line):||90 dB|
|Protection:||Overheat, overload, short-circuit, DC, softstart|
|Indicators:||Power, fault, clip, signal|
|Dimensions:||483 x 335 x 92 mm|
|Rack installation with 2 U|
|80709804-Manual-41818-1.200-de_en.pdf (3 MB)||1.200||de_en|
Write Your Own Review