Air and Space

Name: PRESONUS R80 8" Aktiivimonitori 150W RMS 40 Hz – 22 kHz, 1 kpl
Brand: Presonus
SKU: 217528
Price: 202.42 EUR
Availability: OutOfStock

R80: AMT design provides a wide soundstage and amazing transient response.

Hear the most subtle details.

The R80 studio monitor features a custom 6.8-square-inch Air Motion Transformer (AMT) tweeter that responds to the subtlest waveforms and the highest frequencies. This allows you to hear the “air” and the greater sense of space that is characteristic of audiophile recordings. The R80 studio monitor's transparent and highly accurate sound makes it ideal for use in both commercial and home recording studios as well as broadcast and post-production environments.

Superior transient response.

In order to dampen resonance peaks at higher frequencies, conventional dome tweeters are injected with fluid to raise their mass, sacrificing transient response time. By contrast, the custom-designed AMT tweeter in the R80 studio monitor uses an incredibly thin, folded Kapton^® membrane (< 0.01 mm) with an inlayed aluminum circuit functioning as the voice coil, allowing the tweeter to move at the same instant as the electric current. The resulting reactive response time provides marked clarity and superior transient reproduction.

Wide, consistent stereo image.

An unfolded AMT tweeter diaphragm provides 8 to 13 times the projection area of a traditional 1-inch dome tweeter, enabling R80 studio monitors to provide a much wider stereo soundstage than traditional designs. At the same time, the R80 speaker design provides a very limited vertical dispersion, which helps to reduce reflections from the ceiling and desktop that can cause phase coherence issues. Because it’s less subject to room-anomaly interference, the R80 studio monitor reacts predictably and sounds consistent from room to room.

Transparent sound.

The R80 studio monitor utilizes an 8-inch, woven composite, low-frequency driver. This rigid cone maintains a more consistent dispersion pattern across its frequency response range. Biamped and driven by a 150W Class D amplifier—making the R-series speakers some of the most powerful studio monitors in their category—these monitors deliver an open, clear, and less fatiguing listening experience.

Have it your way.

You can customize the R80 studio monitor in several ways. It’s available with black or blue faceplates to fit your studio décor. With balanced XLR, balanced ¼” TRS, and unbalanced RCA line-level inputs, it’s easy to feed audio to your R80 studio monitors from a mixer, an interface, a media player, or almost any other line-level source. And R-series studio monitors offer user-adjustable contour features for optimizing the monitors for your mixing space. This enables full integration into any studio environment.

Learn about the R80 user controls

The R80 studio monitor offers a four-position Acoustic Space switch that helps to compensate for the boundary bass boost that occurs when the monitor is placed near a wall. A high-frequency driver level control helps to further mitigate room anomalies. An onboard highpass filter makes it easy to integrate a Temblor^® T10 or other subwoofer into your monitor setup.

Accuracy defined.

The R80 AMT studio monitor's design provides lifelike sonic reproduction that will allow you to hear the room in your recordings. Its transparent sound and responsive transient reproduction makes it an ideal solution for anyone who is mixing high-resolution audio. Hear the R80 studio monitor at your favorite PreSonus^® dealer.

Features

Components and Construction

2-way active AMT design provides articulate high-frequency response and wide stereo imaging
Custom-designed, 6.8-inch, AMT ribbon tweeter responds to the subtlest waveforms and the highest frequencies
8-inch woven composite LF drivers provide transparent mid- and low-frequency reproduction for clean sound and punchy bass
Balanced XLR and ¼-inch TRS plus unbalanced RCA inputs provide flexibility for seamless integration into any environment

User Controls

Acoustic Space settings (Linear, -1.5 dB, -3 dB, -6 dB) compensate for room placement

Power and Safety

Biamped 150W RMS (LF = 100W, HF = 50W), Class D power amplifier with switching power supply
RF interference, output current limiting, over temperature, turn-on/off transient, and subsonic filter protection
Energy Conservation Mode (with enable/disable) lowers standby power to <0.5W
External mains fuse
Internal power supply with IEC connector

Technical Specifications

Inputs

1- Balanced XLR
1- Balanced ¼” TRS
1- Unbalanced RCA

Performance

Frequency Response 40 Hz – 22 kHz
Crossover Frequency 2.6 kHz
LF Amplifier Power 100W Class D
HF Amplifier Power 50W Class D
Peak SPL (@ 1 meter) 107 dB
LF Driver 8” woven composite
HF Driver Type AMT
Diaphragm 6.8-inch2 (4,400 mm2)
Equiv. Diaphragm ø 3” (75 mm)
Input Impedance 20 kΩ balanced, 10 kΩ unbalanced
SNR (typical, A-weighted) >100 dB

Power

Factory preprogrammed 100-120V ～50/60 Hz or 220-240V ～50/60 Hz
Standby Power < 0.5W
Protection
RF interference
Output-current limiting
Over-temperature
Turn-on/off transient
Subsonic filter
External mains fuse

User Controls

Volume Range A-type taper
HF Driver Linear, +1 dB, -3 dB, -6 dB
Highpass filter Linear, 60 Hz, 80 Hz, 100 Hz
Acoustic Space Linear, -1.5 dB, -3 dB, -6 dB
Energy Conservation Mode On/Off/Query

Cabinet

Vinyl-laminated, medium-density fiberboard

Physical

Width 9.5” (241 mm)
Depth 12” (309 mm)
Height 15” (379 mm)
Weight 19.8 lbs (9 kg)
ProductsStudio SpeakersStudio MonitorsR80Tech-specs

Mer information