SRS DXD-8N DMX-Merger Erittäin korkealuokkainen
Artikelnummer
265686
DXD-8N DMX-Merger Erittäin korkealuokkainen DMX-yhdistin.
Moms 24% | 0%
699,00 €
Helsingfors butik:0 st
Leverantörens lager:
Ask for availability
Leverans bara: 7,90 € - Or pickup from store!
DXD-8N is a two-input DMX merger with HTP / LTP / DMX-A backup or DMX-B backup modes. It is ideal for applications where merging of two DMX signals is needed. Examples of usage are two DMX consoles controlling one dimmer system or controlling of house light. Moreover, the unit can be used as a scene call device for calling of the minimum DMX value.
This value is then sent to dimmer with connected LED lights in case the main console is disconnected or LED lights are flickering on low DMX value because of technical requirements of LEDs.
DXD-8N is equipped with a bootloader for easy firmware update.
All connections are made thru 3/5 and RJ45 terminals and unit is easy for setup via 12x2 display, encoder and 2 buttons.
The display shows several pages of information including: DMX A and B status; merger mode
Features include:
Two DMX inputs merge to single DMX output
DMX scenes that can be loaded when input signal is lost
DMX scenes wich can be mixed vith HTP/LTP rules
Minimum scene setting /for LED equipment
optional RDM
All DMX/RDM outputs are boosted signals (connect up to 32 devices per output)
Optocoupler isolation for all input and outputs - full isolation
Bi-colour LED confirms presence of viable DMX signal
Firmware update via SRS upgrade cable
This value is then sent to dimmer with connected LED lights in case the main console is disconnected or LED lights are flickering on low DMX value because of technical requirements of LEDs.
DXD-8N is equipped with a bootloader for easy firmware update.
All connections are made thru 3/5 and RJ45 terminals and unit is easy for setup via 12x2 display, encoder and 2 buttons.
The display shows several pages of information including: DMX A and B status; merger mode
Features include:
Two DMX inputs merge to single DMX output
DMX scenes that can be loaded when input signal is lost
DMX scenes wich can be mixed vith HTP/LTP rules
Minimum scene setting /for LED equipment
optional RDM
All DMX/RDM outputs are boosted signals (connect up to 32 devices per output)
Optocoupler isolation for all input and outputs - full isolation
Bi-colour LED confirms presence of viable DMX signal
Firmware update via SRS upgrade cable
Produktlänkar | http://www.srslight.com/index.php?index=product&product=DMX_Merger |
---|
Write Your Own Review