5 DMX512 inputs
1 DMX512 output
Only 50us latency
Bypass relay
Manual switch
HTP, LTP channel, LTP line Modes
Channel offset for each input

The XMG-51 DMX merger combines up to five DMX lines together into one. This allows for using multiple DMX lighting control systems simultaneously on a single light installation. The DMX data is merged together according to your configuration, allowing the device to be used for a variety of applications:

The 512 cannels can be split amongst up to five controllers. For example, controller A controls the channels 1-48, controller B controls the channel 50-74 and the channels 200-400 are controlled by controller C.

Several light controllers can operate on the same channels. For example, a single lamp can be accessed by several controllers at the same time. Which controller has priority is configurable (HTP; highest takes priority, LTP; latest takes priority).

A mobile light controller could be plugged in at different places of the venue. The merger recognizes where the controller is plugged in and switches automatically the corresponding port to the output.

A backup lighting controller can be used at the same time as the main lighting controller by using the XMG-51 merger. The merger will automatically switch to the backup controller in the case of a failure of the main controller.

The XMG-51 has a built-in bypass relay which connects the output to a dedicated input in the event of a power supply failure.

Weight	1.4 kg (3.1 lb.)
Dimensons (L x W x H)	482.6 x 109 x 44.5 mm (19" x 4.29" x 1.75")
Ambient temperature	-17 to +55°C (0 to +131°F)
Typical power consumption	4 W
AC power input	85 - 276 V AC
Merge Mode	HTP, LTP ch, LTP line
Offset	On all inputs (exception: input 1) from 1-512
Bypass	Input 1 directly to output
Break-Zeit	180 µs
MAB-Zeit	16 µs
DMX	ANSI E1.11