SPECIFICATION

Two DMX inputs merge into single DMX output
RDM ANSI E1.20 as a standard
Fully isolated DMX = Optocoupler isolation + DC/DC power
All DMX/RDM outputs are boosted signals
(connects up to 32 devices per output)
DMX channel offset for each input and also output
DMX scenes can be loaded when input signal is lost
DMX scenes can be mixed using HTP / LTP rules
Shift of the DMX address for all inputs and outputs
Minimum scene setting (for LED equipment)
Screw terminal for remote buttons
Optional wall mount via UNIHOLDER60
Firmware update using the SRS upgrade cable

DESCRIPTION

The DXD-8NI is a two-input DMX merger with HTP, LTP, DMX-A backup and DMX-B backup modes. It is ideal for applications, where merging of two DMX signals is needed. Examples of usage are two DMX consoles controlling one dimmer system or controlling of house light. Moreover, the unit can be used as a scene calling device to call the minimum DMX value.

This value is then sent to the dimmer with connected LED lights in case the main console is disconnected or LED lights are flickering on low DMX value because of technical requirements of LEDs.

All connections are made using 3/5-pin and RJ45 terminals.

The unit is easily controlled using a 12 by 2 symbol display, encoder and 2 buttons.The display shows several pages of information including: DMX A and B status and the merger mode.

DXD-8NI is equipped with a bootloader for easy firmware update.