UNIVOX PLS-X3 induktiosilmukkavahvistin


PLS-X3 induktiosilmukkavahvistin.

Vahvistimessa on myös varsin monipuoliset liitännät.

795,00 €
Sis. alv 24%
Saatavilla keskusvarastolta: 2-8 arkipäivää
Toimittajan varasto:
Ota meihin yhteyttä tarkemman saatavuuden varmistamiseksi
Tälle tuotteelle: Ilmainen toimitus!

Huom! Kun tilaat vähintään 295 eurolla, saat toimituksen ilmaiseksi!

PLS-X3  Item no.: 217300

Loop Driver suitable for small theatres, waiting areas, conference facilities and medium sized rooms.

• 5 year warranty
• 1U high and ½ width (19" rack) for
side by side mounting to save rack
• Parametric Metal-Loss-Control for
various types of metallic influences
• Built-in System diagnostics, to isolate
a system malfunction
• Programmable XLR, RCA and screw
terminal input connectors
• Dual Action AGC for unsurpassed
• Low frequency masking filter for
voice enhancement
• 50-100 V input
• Voice alarm system input that overrides
all other input signals
• Convection cooled for silent reliable
• 10 W output for connecting a speaker
to monitor/verify driver activity
• Front panel placed controls for easy
installer access
• Recessed controls to prevent tampering
• Rack mounting kit

Univox PLS-X3 is suitable for small theatres, waiting areas, conference facilities and medium sized
Space and power efficiency
PLS-X series is the most efficient professional loop drivers available. The units are only 1U high
and ½ widths, making it possible to mount two drivers in one single 19” rack mount. Univox PLS-X
series uses a 90 % efficient electronic transformer. Energy waste in a conventional power supply is
comparably 8-9 times higher. Weight is reduced by use of significantly less copper and other metals
than conventional loop drivers, leaving a much smaller carbon footprint. PLS-X loop drivers produces
an amazingly clear sound which is not possible using conventional toroid transformers as modulation
distortion is unavoidable.
The self-diagnostic system
When activated, input connection, AGC, pre and power driver and consistency of loop conductor will
be diagnosed. The diagnostics will indicate which systems are operational and which are not. The
built-in signal generator, which is part of the self-diagnostic system, can be used to set just the
output level if another signal source is not available.

Linkki Tuotteen infoon

Valmistajan Tuotenumero890508
Write Your Own Review
Vain rekisteröityneet käyttäjät voivat kirjoittaa arvosteluja. Ole hyvä ja Kirjaudu sisään tai Luo tili

Lisää tältä tuotemerkiltä